It creates points on the sketch. There are two ways to create a point. Click point command on Ribbon Bar. Select point command from “menu=>insert=>Datum/Point=>
There are three methods to create Arc Press “A” on the keyboard. (Shortcut: A) Click arc command on Ribbon Bar. Select arc command from “menu=>insert=>
Profile command makes continuous lines and arcs. (Shortcut: Z) After activating the profile command, the profile dialog box occurs. The dialog box has two
There are several ways for opening existing part -Click on the open button on the Ribbon Bar – Click “File => Open” (on the top left of the screen) – Click
For starting NX 11 click on start => all programs => Siemens NX 11.0 Also, you can create a shortcut on windows desktop or pin to windows start The default NX11
In the new NX Continuous Release versions, some of the most used commands are hidden from the Ribbon Bar. You can make visible these commands on the ribbon bar
