2022 – cad-tips

Shell in NX Modeling

December 9, 2022

–

admin

–

In NX modeling, You can hollow out a solid body inside a model by specifying a wall thickness on the outer surface of the solid body. The “Shell” command

Draft in NX Modeling

December 5, 2022

–

admin

–

NX CR 2206

You can modify body faces by changing their angles to reference objects. Mostly it is used for molded parts to remove from their mold. In NX Modeling the

Solid Modeling in NX

November 26, 2022

–

admin

–

NX CR 2206

Modeling application is used for creating 3d solid bodies in NX. The figure shows the modeling commands on the “Home Ribbon Bar”. To start modeling application

Starting NX 2206

November 26, 2022

–

admin

–

NX CR 2206

The NX software interface is shown in the figure below. Quick Access Toolbar: It contains main commands as other software programs like New File, Save, Undo,

This online course covers the design aspects of Siemens NX version 2206, a comprehensive software used for Modeling, Manufacturing, and Engineering Analysis. The curriculum includes Sketching, 3D Solid Modeling, Surface Modeling, Sheet Metal Modeling, Assembly Modeling, and Drafting.

Chamfer Creating in NX Modeling

November 16, 2022

–

admin

–

NX CR 2206

You can create chamfers on the solid body by using the “Chamfer” command in the NX modeling. There are three different chamfer creation methods in the command

Edge Blend in NX Modeling

November 5, 2022

–

admin

–

NX CR 2206

You can fillet sharp edges in NX modeling by using the “Edge Blend” command in NX modeling. To round sharp edges: Start the “Edge Blend” command. The command

Creating Holes in NX Modeling

November 4, 2022

–

admin

–

NX CR 2206

You can create holes at the selected points on the body or on the points created in the sketch. To create holes, the “Hole” command is used in the NX modeling.

Revolve command in NX Modeling

November 4, 2022

–

admin

–

NX CR 2206

You can create a solid body or a feature on the solid body by rounding a closed section around a selected axis by using the “Revolve” command. To create

Extrude in NX Modeling

November 4, 2022

–

admin

–

NX CR 2206

You can extrude the sketches, curves, and face edges to create a solid body or sheet body in the NX modeling. Also, Extrude command is used to edit created

Year: 2022

Shell in NX Modeling

Draft in NX Modeling

Solid Modeling in NX

Starting NX 2206

Siemens NX 2206

Chamfer Creating in NX Modeling

Edge Blend in NX Modeling

Creating Holes in NX Modeling

Revolve command in NX Modeling

Extrude in NX Modeling