You can divide the faces of the solid bodies in the NX modeling. These Divided Faces can be used for painting masking details, marking or lettering details on
You can extend sheet bodies on the selected edge of the sheet Face. It looks like the “Extrude” command but you extend only the edge of the sheet body on the
You can divide a solid body or sheet body by using a face, face set, datum plane, curve, curve set, or sketch. Home Ribbon Bar => Base Group => More Drop
In NX modeling, you can trim a body or body set using a face or plane. The trimmed side of the body will be removed from the body. For trimming bodies the
You can create offset faces at a specified distance from the selected faces. The created offset surface will be created in a new body. The “Offset Surface”
You can create a solid body by thickening a sheet body or solid body faces in NX Modeling. For this operation, the “Thicken” command is used. The “Thicken”
You can change a solid body density in NX Modeling. Important Note: If you assign a material to a solid body, remove the material from the body before changing
You can create a solid body on the intersected volume of the created solid bodies in the NX Modeling by using the “Intersect” command. To create solid bodies
