You can resize the sheet metal Bend Radius in NX Sheet Metal after the sheet metal model is created. You can change all the bend radius (Method 1,2) or selected b
Read More Resize Bend Radius in NX Sheet Metal
Month: March 2023
The "Drawn Cutout" looks like the "Dimple" command in NX Sheet Metal. The "Drawn Cutout" is the opened version of the "Dimple". The figure shows their
Read More Drawn Cutout in NX Sheet Metal
Drawn Cutout in NX Sheet Metal
You can form a solid body shape to sheet metal in NX as seen in the figure. To form a solid body face to sheet metal: Create a sheet metal model in the sheet
Read More Solid Punch in NX Sheet Metal
Solid Punch in NX Sheet Metal
You can create an Air Inlet-Outlet Louver feature in NX sheet metal design as shown in the figure. To create a Louver: Draw a single line on the planar sheet
Read More Creating Air Inlet-Outlet Louver in NX
Creating Air Inlet-Outlet Louver in NX
You can offset a sketch region to create a dimple feature on the sheet metal in NX as shown in the figure. To create a dimple Start the "Dimple" command.
Read More Dimple in NX Sheet Metal
Dimple in NX Sheet Metal
You can change the sheet metal thickness in the NX Sheet Metal application after the sheet metal design is finished. There are two different methods for this
Read More Changing Sheet Metal Thickness in NX
Changing Sheet Metal Thickness in NX
You can change the default sheet metal thickness in the NX Sheet Metal Application. The figure below shows the setting location in the "Customer Defaults".
Read More Changing Default Sheet Metal Thickness in NX.
Changing Default Sheet Metal Thickness in NX.
You can change the background color of NX for the current working file. If you want to change the background color permanently for the default settings, change
Read More Changing Background Color in NX
Changing Background Color in NX
You can create a taper on the bended feature of the sheet metal model in NX Sheet Metal Design. For this operation the "Bend Taper" command is used which is
Read More Creating a Taper on the Flange
Creating a Taper on the Flange
In sheet metal design the "Normal Cutout" command is used for removing material from the solid body. The figure shows the difference between the usage of the
Read More Normal Cutout in NX Sheet Metal