You can create a surface from the closed contour of a curve set or edges. The created surface can be modified by changing the method or the “Control Point Offset” in the command dialog box. To create a surface by
It creates surface through four points. Each point defines the corner of the created surface. You can use the existed points or specify the new points on the screen. To create a surface by using the “Four Point Surface” surface
The “Law Extension” command extends the curve or edge on the surface to create a sheet body. You can create different types of extensions by changing the rules in the Length Law and Angle Law in the command dialog box.
You can create a solid or surface body by a sweeping curve or closed contour through one or more guide curves. Sweeping closed contour creates a solid body. Sweeping opened curves create a sheet body. To create a body by
You can create a sheet body through curves by using the “Through Curves” command. If the curves do not have closed contours, the created body will be a surface body. To create a surface by using the “Through Curves” command.
You can hide parts or subassemblies from the selected views in the assembly drafting in NX. For example, I will hide screws and washers from one of the isometric views. They will visible in other view. Start the “Hide Components
You can pattern parts or sub-assemblies of the assembly through points in NX. To pattern components through points: Start the “Pattern Component” command. Set the “Layout” as “General” Specify the first reference point to copy. (If you can not select
You can create a set of part/sub-assembly component copies in the assembly in NX. To activate pattern component : Home => Assemblies Group => Pattern Component Assemblies => Component Group => Pattern Component The most used pattern Layouts: Linear Pattern Circular
You can make circular patterns of components in the NX. Also, you can delete some of the instances in the pattern. To create a circular pattern in the assembly: Start the “Pattern Component” command. Select parts or sub-assemblies to pattern.
You can make linear patterns of components in the NX. Also if you want you can delete some of the instances in the pattern. To create a component pattern in the assembly Start the “Pattern Component” command. Select parts or