Tag: Assembly

You can measure the distance between two objects through the x,y, and z directions or by referencing any straight objects like curves or edges in Siemens NX.

You can reset the command dialog box settings and values in Siemens NX. For this operation click on the “Reset” icon after the command dialog box opened.

You can copy component geometries into the assembly or other components in the NX Assembly application. To copy a geometry in the NX application. Make a work

In the new versions of the NX, Exiting from the exploded view might be a problem after the explosion is created. This problem occurs because “No Explosion” is

You can hide components permanently in NX Assembly. When you suppress a component, The show/hide command can not show suppressed component. You can see the

You can create a new component in NX Assembly. This component can be a part or sub-assembly in the main assembly file. To create a New component in NX Assembly

You can change a component (part, sub-assemblies) with another component in NX Assembly. In this operation the selected component is removed from the assembly

You can create a new part by using an existing part in the NX Assembly file. This new part will have the same geometry as the old existing part until you change

You can move and/or rotate components in the NX Assembly file. You can move freely or at a specified distance or angle. Also, you can use reference points to

You can create an up-level parent assembly file for the current working part or assembly file. The working part file will be a component in the newly created