In the newer versions of the NX, You might have measuring problems during 3D model face or curve radius measuring. This problem occurs because of the settings
You can measure the x, y, z coordinate distances between objects in NX. Also, you can show the start point and endpoint coordinates on the graphics window.
You can learn the coordinate of a point by using the “Measure” command. Before selecting the point, You should change the “Object to Measure” setting as a
With the new version of the NX, all measure commands combined in a one single “Measure” command. In older versions, there are several commands to measure like
All measure commands combined in a single “Measure” command with the new version of the NX. You can choose your measure style in the “Measure” command window.
You can measure bodies by using the “Measure” command in the NX CR. But by the default measure command measures distances between objects. You should change the
You can measure face properties such as Area, Perimeter, Center of Gravity by using measure command. To measure face properties by using the “Measure” command
You can measure a single curve length or total length of the curves in NX. To measure curve/edge length by using the “Measure” command, change the setting in
You can measure angles by using measure command in the NX CR modeling. In the older versions, there was a specific command to measure angles (Simple Angle
You can measure the distance between two objects by using the “Measure” command. You can find command in the different ribbon bars listed below. “Home =>
