You can create solid walls on a sheet surface in NX. The sheet surface thickens on a specified side or each side through a given thickness. To create a wall on the surface Start the “Thicken” command. (Home Ribbon Bar
You can scale a solid body or sheet body in NX. You can change the scale method of the body by changing the type of scale from the first tab. Methods to Scale Uniform: Scales the body uniformly in all
You can move or rotate the objects in NX. These objects might be a solid body, sheet body, curves, etc. You should be careful when moving objects. Because if there is any link between moving objects and other objects, linked
“Rib” command adds a thin-wall rib or rib network by extruding curve/curves set to intersect a solid body. To activate command: Home Ribbon Bar => Feature Group => More Gallery => Design Feature => Rib Menu => Insert => Design
Commands used in the video: Sketch Extrude Edge Blend
“Face Blend” creates fillet/fillets between faces. You can create fillets between faces that not connected. To create fillet by using “Face Blend” command:
By the default settings of the NX and older versions of the NX, sketches are staying visible even if they used in commands like extrude, revolve, etc… You can make sketches internal to hide completely from the graphic window and
By the default NX settings, the Sketch origin method is set as “Specify Point”. That’s because sketch origin assigns on the nearest corner on the selected model face. (Nearest corner on the mouse cursor selection)
Lifts one side of the sheet metal part through a defined line. Ads flange between the stationary side and lifted side.
Bends sheet metal model through line.