Tag: modelling

The body of the case modeled before and we will make an enclosure of the case. Open Model of the Case body. Click “Create New Parent” to create an assembly

Delete Body command, deletes one or more bodies in the modeling.

You can activate command by:

The Chamfer command creates chamfer on edges by adding or subtracting volume on solid bodies.

Its usage is very similar to the Edge Blend function.

To activate

Edge blend command creates smooth tangent faces between faces which connected on edge.

To activate edge blend command click the

Revolve Command makes volume by revolving section around an axis.

There are several different ways to start the Revolve command.

Click on Revolve command on

In NX and other cad programs, solid bodies are created by adding, subtracting volumes from created body volume. None: It is used for

There are two limits in the “Limit” tab. They are “Start” and “End” of the extruded body. You can change both of them with different methods.

There are two important functions in the “Direction” tab

Reverse Direction: You can change the direction of the extrusion by clicking

Section bar in extrude command used to select sketches, curves, areas, or faces. It should be active. (orange-colored when active) Also, you can make a

Extrude Command makes body or surface by extruding sketch. Also, you can extrude curves, edges, surfaces, sections, areas. Shortly you can extrude everything