In NX Drafting, You can import external image files such as PNG, JPG, TIF or BMP formats to the technical drawing sheets. There are two different methods to
You can create curves on the intersection of the objects. These intersection curves can be created: on the intersection of objects such as surfaces or solid
You can create a points pattern on a face in Siemens NX Modeling as shown in the figure. To create a point-set pattern on a Face: Start the “Point Set” command.
When you are creating a BOM list in NX Drafting, Some of the parts might miss on the part list. This is a common problem in NX drafting. You should be very
You can create sketches to draw curves in the NX drafting. But you should be very careful when creating sketches in the drafting. On the other hand, fatal
The java error is the most common Siemens NX installation problem. Different java errors might occur but there is one solution for all of them. The Java
Sometimes in NX modeling, there might be a lot of objects in the graphics window that makes it hard to see and work on solid bodies in the working model. There
You can create cylindrical dimensions on holes or cylindrical objects in the NX drafting. There are two methods for creating cylindrical dimensions. Method 1:
You can hide or show smooth tangent edges of the 3D models on the views in the NX Drafting views. In the image, you can see the differences between the views
You can create centerlines between parallel curves or through points on a technical drawing by using the “2d Centerline” command in the NX Drafting. To activate
