Tag: Sketch Curve Gallery
Polygon in NX Sketching
In NX Sketching, the “Polygon” command enables creating polygons but is not immediately visible in the sketching home ribbon bar. To access it, use the
Scale Curve in NX Sketch
The “Scale Curve” command scales the selected curves in the NX Sketch. There are two methods in the command to scale curves. Dynamic Method: Scales the curves
Delete Curve in NX Sketch
The “Delete Curve” command is used to remove curves in the NX Sketch. To delete curves in the sketch: Start the “Delete Curve” command. Select the curves to
Resize Chamfer Curve in NX Sketch
You can change the size of the chamfers dimension by using the “Resize Chamfer Curve” command in the NX Sketch. To change chamfer size: Start the “Resize
Resize Curve in NX Sketch
The “Resize Curve” command changes the diameter/radius of the circles, arcs, or fillets in the NX sketch. You can change the selected multiple curves at the
Offset Move Curve in NX Sketch
“Offset Move Curve” command offset the selected curves at a specified distance in the NX sketch. The command might change the curves that are not selected if
Mirror Curve
The “Mirror Curve” command creates a mirror pattern of the curves in the sketch. To activate command: Home Ribbon Bar => Direct Sketch Group =>
Point
Draws point in the sketch. These points can be used for reference points or define hole positions when the hole command used.
Arc
Arc dialogue box opens after the Arc command activated. There are two different methods for drawing an arc.
1- Arc by 3 Points: You can draw an arc by
Circle
A circle dialogue box opens after Circle command activated. There are two different methods for drawing circles. Circle by Center and Diameter: You can draw