Closed Corner

Closes two adjacent flange corners in sheet metal application.

To activate command:

• Click on command on (When sheet metal application activated.) “ Home => Corner Group => Closed Corner”
• Activate command from “Menu => Insert => Corner => Closed Corner”

For Using “Closed Corner” command:

• Activate the “Closed Corner” command.
• “Select Adjacent Bends” in Bends to close will be highlighted automatically when command started. Select two adjacent bends.
• If the corner is suitable for closing. The corner will be changed automatically.
• Select the treatment type. (I mostly select “U cutout.)
• Select overlap type as “Closed” or “Overlapping”.
• Define the position and diameter of the cut-out. (Laser cutting machines can not cut diameters smaller than sheet metal thickness. Change diameter in “Relief Properties”)
• Arrange the offset value.
• Click MMB or “Ok” to finish.