NX 11


Lifts one side of the sheet metal part through a defined line. Ads flange between the stationary side and the lifted side.

To activate command:

  • Home => Bend Group => More Gallery => Bend Gallery => Jog
  • Menu => Insert => Bend => Jog

Using the “Jog” command:

  • Activate “Jog”
  • Select a line or create a sketch to draw a line. (“Select Curve” highlighted when the command starts)
  • Arrange height and direction.

To arrange height.

    • Type height value in the “Height” box in the command window.
    • Drag arrowhead on screen.
    • Click on the arrowhead. Then type a value in opening pop up.

To arrange direction:

    • Click the reverse box on the command window near the “Height” tab.
    • Double click on height arrow in the screen
  • Define a fixed side of the model by clicking the “Reverse Side” box in the “Jog Properties” tab.
  • If you want, You can change height dimensioning references by changing settings in “Height Reference
  • To change the bending position due to line change “Inset” settings in the “Bend Properties” tab.
  • Click the middle mouse button or “Ok” to finish.

Leave a Reply

Your email address will not be published. Required fields are marked *